Description

Installed power: 10200 W

Peak power: 10320 W

Annual production calculation: 12943.13 kW

Storage capacity: 10240 Wh – usable 80% of capacity (additional batteries can be added later, in pairs of 2).

Inverter power: 8000VA ~ 6400W

System autonomy: 10 hours at a consumption of 1000Wh, 5 hours at a consumption of 2000Wh

This system is suitable for residential/industrial consumers who have access to the grid, desire energy independence, and aim to become prosumers.

AC/DC protections and photovoltaic panel mounting systems are not included in this kit.

Kit components:

Trina Solar Vertex S 435W Photovoltaic Panel – 24 pcs

SmartSolar MPPT 250/85-Tr – 2 pcs

Quattro 48/8000/110-100/100 230V VE.Bus – 1 pc

LiFePO4 Battery 25.6V/200Ah Smart-a – 2 pcs

VE.Bus BMS – 1 pc

Lynx Power In (M8) – 1 pc

SmartShunt 500A/50mV – 1 pc

Victron Energy Cerbo-S GX – 1 pc

MEGA-fuse 300A/32V (package of 5 pcs) – 1 pc

MEGA-fuse 225A/32V (package of 5 pcs) – 1 pc

VE.Direct Cable 3m – 2 pcs

Solar Panel 435W

Trina Solar Vertex S panels generate up to 435 W, with 21.8% module efficiency and high-density interconnection technology. These panels offer several advantages:

– Multi-busbar technology for better light capture.
– Lower series resistance.
– Improved current collection and increased reliability.
– Excellent performance in low light conditions (IAM) through cell processing and module material optimization.

Victron Energy Quattro 48/8000/110-100/100 230V

The Quattro photovoltaic sinusoidal solar inverter can be connected to two independent AC sources, such as the electric grid and a generator, or two generators. The Quattro inverter will automatically connect to the active source. The Quattro photovoltaic sinusoidal solar inverter takes over supplying connected consumers in case of a grid failure or low generator power, ensuring uninterrupted operation of computers and other electronic equipment. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to function without interruption. The second output operates only when AC is available at one of the Quattro inputs. Consumers that should not drain the battery, such as a water heater, can be connected to this output. Up to 10 Quattro inverters can operate in parallel to achieve higher output power. For example, ten Quattro 48/10000/140 inverters will provide 90 kW/100 kVA output power with a charging capacity of 1400A.

Victron Energy SmartSolar MPPT RS 450/200-Tr

By constantly monitoring the voltage and output current of solar panels (PV), MPPT technology ensures that every drop of available energy is captured from the panels and collected for storage. This advantage is most noticeable when the sky is partially cloudy, and light intensity constantly changes. Remote control and monitoring of the extended features of your MPPT charger via association with your smartphone or another device through VictronConnect connected to the Victron Remote Management (VRM) internet management portal provides access to your MPPT’s maximum power, anytime, anywhere; both services are free. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor the MPPT by associating it with a LoRaWAN device (a long-range wireless network), available optionally through Bluetooth.

Victron Energy LiFePO4 Battery 25.6V/200Ah – Smart

LiFePO4 batteries are the safest lithium-ion batteries on the market. The nominal voltage of a LiFePO4 cell is 3.2V, unlike 2V for lead-acid batteries, so a 12.8V battery contains 4 cells connected in series, and a 25.6V battery contains 8 cells connected in series. It is not necessary for a LiFePO4 battery to be fully charged. The lifespan of such a battery improves with partial charging rather than full charging, which is a significant advantage over lead-acid batteries. Other advantages include large temperature ranges in which it can operate, excellent performance in cycle count, low internal resistance, and high efficiency, which is 92%. Cell voltages, temperature, and error status can be monitored via Bluetooth, which is very useful for locating potential issues such as cell imbalance.

VE.Bus BMS

VE.Bus BMS protects each individual cell in a Victron lithium-iron-phosphate (LiFePO4 or LFP) battery. Each individual cell of a LiFePO4 battery must be protected against overvoltage, underpressure, and overtemperature. Victron LiFePO4 batteries have integrated balancing, temperature, and voltage control (acronym: BTV) and connect to the VE.Bus BMS system with two sets of M8 circular connector cables. The BTVs of multiple batteries can be daisy-chained. Consult the LiFePO4 battery documentation for details.

Cerbo S-GX

This brand new communication center allows you to have perfect control over your system from anywhere and maximize its performance. You can simply access your system through our Victron Remote Management (VRM) portal or directly access it using the optional GX Touch display, a Multi-Functional Display (MFD), or our VictronConnect application, thanks to its Bluetooth capability.

SmartShunt 500A

SmartShunt is a good alternative to a BMV battery monitor, especially for systems where battery monitoring is required but fewer cables and clutter are desired. SmartShunt comes with Bluetooth, a VE.Direct port, and an auxiliary connection that can be used for monitoring an additional battery, median monitoring, or temperature sensing.

Lynx Power in

Lynx Power In contains a positive and negative busbar with 4 connections for batteries, loads, or chargers, and a mass and grounding connection. It is part of the Lynx distribution system.